HONWAY square plates would not leave trace on floor, as I know some
machines like G5 usually leaves trace on floor, which is caused by
the design problem, as the disc plate can't cross very well.G5
would have not this problem.
It is not only applied for concrete, but also for terrazzo, marble
and granite floor.
Parameters:
| Voltage | 220-240V ,1P/3phrase | 380V-440V, 3phrase |
| Frequency | 50/60HZ | 50/60HZ |
| Current | 27.0A | 15.6A |
| Power Output | 10hp(7.5KW) | 10hp(7.5KW) |
| Inverter power | 10hp(7.5KW) | 10hp(7.5KW) |
| Motor speed | 300-1800rpm | 300-1800rpm |
| Grinding width | 600mm | 600mm |
| Disc Dianeter | 320mm*4plate | 320mm*4plate |
| N.W | 265KG | 265KG |
| Water Tank | 30L | 30L |
| Dimension | 930*600*950mm | 930*600*950mm |
Features
The bearing is famous brand-Japan NSK and China C&U
Four small discs counter rotate, large main disc seal bearing, low
noise
Special design of disc available for different kinds of abrasive
Different grinding plates can be designed according to your request
Product Details:
HW-G5 is a square design concrete grinding machineIt is driven by
gears and has four grinding plates. Thegrinding plates counter
rotates, but would not leavetrace on floor. 600mm grinding width is
wider than580mm which is common in the market
Application:
For coarse grinding, medium grinding, fine polishing.crystallizing,
preparation, maintenance of all kinds offloor. Remove painting,
coating, epoxy, urethane, gluepolyurethane, mastic with PCD tools
on all kinds of floor
Closer Look
Production Flow
Company introduction
Changsha Honway Machinery Co., Ltd is the professional manufacturer
for floor scarifying & grinding & polishing machine in China. We
are located in Changsha city which is well known as the capital of
construction machinery in China. This city has the abundant supply
of machinery engineers, workers, technique, workcraft, etc. Our
company develops here and builds up as a manufacturing the machines
for ‘Concrete Superflat floor’.
After Sell Service
- One year of warranty for machine.
- We always supply the consumables.
- We always supply the spare parts for all the old models.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- The CD and operation manual is sent with machine to guide the
installation process works and repair problems.
- All machines are tested, and the testing record will be kept,
before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
FAQ
Q: Where is your factory?
A: It is located in Changsha, Hunan province. Welcome you come to our
factory and produce process at any time.
Q: What kind of machine you supply?
A: Concrete grinding machine, concrete scarifying machine, diamond
tools.
Q: What voltage of your machine?
A: 380V three phase,220V three phase and 220V single phase.
Q: What certificates of your machine?
A: 3C CE SGS
