Single Head Floor Tile Polishing Machine , Compact Floor Cleaning
Machine
The floor grinder and floor edge grinder is in one!
HW-G1 combines floor grinder and floor edge grinder into one. The
ergonomic working posture allows the worker stand straight behind
the machine, reducing fatigue, backaches, job site injures,
maximizing comfort and increasing productivity.
HW-G1 is 280 grinding width, it is ideal for removing the paint,
thin set, adhesives, VCT, mastic and epoxy coating on floor; the
floating cover follows the floor's ups and downs, to prevent dust
from entering working site.
Parameters
| Model | HW-G1 |
| Voltage: | 220V 1phrase |
| Power output: | 2.2KW,3hp |
| Motor Brand: | China Winder |
| Frequency: | 50/60HZ |
| Current: | 13A |
| Grinding Width: | 280mm/11” |
| Grinding Pressure: | 41KG/90.2lbs |
| Additional Weight: | N/A |
| Dust Port: | Φ50mm |
| Motor Speed: | 1400rmp |
| Diamond Pad Holder: | 6 Pieces |
| Machine L*W*H: | 1100*420*1000mm |
| Net Weight: | 75KG/165lbs |
Features
1, Removable cover lids on the sides and brush make edge grinding easily and
conveniently-just loose the screws;
2, The triangle design of stamping part assures the stability of the motor and balance of grinding plate; the diamond pads on the plates would work smoothly ;
3, Unlike the fixed cover, the floating cover could follow floor profiles, up and down, eliminating the suction
lock and capturing 99% of dust, keeping the working site clean;
4, Schneider and Delixi apparatus guarantee electrical safety.
Closer Look
Comparison
After Sell Service
- One year of warranty for machine.
- We always supply the consumables.
- We always supply the spare parts for all the old models.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- The CD and operation manual is sent with machine to guide the
installation process works and repair problems.
- All machines are tested, and the testing record will be kept,
before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
FAQ
Q: If the floor edge grinder could grind floor?
A: Yes, it can; its grinding width is 280mm and its grinding pressure
is 90.2 lbs;
Q: If HW-G1 could grind floor edge and leaves no margin at all?
A: G1 could grind floor edge, but leaves margin of 2mm, which is the
narrowest margin which the floor edge grinder could achieve. It is
impossible for any machine to leave margin 0mm.
Q: If HW-G1 could grind right edge and left edge?
A: Yes. It can; the two sides could grind floor edge;
Q: How about the floating cover of HW-G1?
A: The floating cover follow floor up and down, preventing dust from
entering work site.
