380V 220V 4KW Power Floor Grinding And Polishing Machine with
Single Plate of 400mm
HW-G2, single grinding plate, 400mm width.
HW-G2 380V can be equipped with a 4KW inverter for rough grinding
on concrete, epoxy, terrazzo floor. (For 220v, single phrase, the
inverter needs to be 5.5kw). Motor speed can vary from 0-1600rpm,
large working width 400mm.
Parameters
| Model | HW-G2 |
| Voltage: | 380V three phrase |
| Power output: | 4KW,5.5hp |
| Inverter Power: | 5.5hp (4 KW) |
| Motor Speed: | 0-1600rmp |
| Frequency: | 50/60HZ |
| Current: | 7.6A |
| Grinding Width: | 400mm/15.7” |
| Grinding Pressure: | 69KG/152lbs |
| Additional Weight: | N/A |
| Dust Port: | Φ50mm |
| NO.of grinding plate | Single one |
| Diamond Pad Holder: | 8 Pieces |
| Machine L*W*H: | 760*420*1200mm |
| Package L*W*H: | 800*450*1000mm |
| Net Weight: | 100KG |
Advantages
Pure copper motor, which is produced by the professional motor
factory with history of 50 years.
Contactor and circuit breaker are original Schneider.
The grinding cover is floating, following floor up and down,
prevents dust from entering work site.
Large grinding area: 400mm grinding width, single head increases
productivity and grinding performance.
Closer Look
Company introduction
After Sell Service
- One year of warranty for machine.
- Honway always store the spare parts of old models, in case that the
machine needs repair in future.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- Honway will service you and your machines for years.
- All gear boxes are tested 48 hours before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
- We always supply the spare parts for all the old models.
FAQ
Q: How about the floating cover of HW-G2?
A: The floating cover follow floor up and down, preventing dust from
entering work site.
Q: If the machine vibrates when it works?
A: HW-G2 has a chassis which is made of triangle structure. It is
more stable and less anti-vibrate. Besides, the machine frame is
made of steel tubes, not steel plate, so it could support machine
more and decrease vibration.
Q: What is the brand of motor and electrical element?
A:The motor is from the old motor factory over 50 years. Honway uses
it since the factory is built up. The motor is made up of pure
copper coils and the fault rate is below 0.5%; The electrical
elements are Schneider, world brand. The brand of buttons is Dehli,
famous China brand.
